High-density elastomeric damping pads, passive pneumatic table isolators, and kinetic absorption mounts engineered to neutralize high-frequency structural resonance under sensitive instruments.
Why choose us
Our high-density elastomeric pads absorb vibrational energy across the exact frequency range that degrades CMM and optical comparator readings. You get sub-micron repeatability without active electronics.
Validated on coordinate measuring machines and SEMs.The PTI-500 pneumatic isolator uses a dual-chamber design to decouple sensitive instruments from floor vibrations. An integrated mechanical leveling valve keeps the table height within ±0.5 mm under changing loads.
Tested on mass spectrometers and atomic force microscopes.KAM-100 kinetic mounts are tuned mass dampers that cancel a narrow resonance band in machine frames or optical breadboards. Interchangeable mass inserts let you fine-tune on site without replacing the mount.
Eliminates chatter in precision grinding and laser interferometry setups.Each pad is precision-molded to maintain uniform thickness and material density. You get the same isolation performance from every unit, which matters when you run multiple identical workstations.
Molding tolerance held to ±0.05 mm thickness.All isolators and mounts use stainless steel fasteners and sealed housings. No rust or degradation from cleaning agents or humidity over years of continuous use.
Passes 72-hour salt spray test per ASTM B117.Engineered solutions that neutralize high-frequency structural resonance under micro-metrology workstations, from damping pads to kinetic mounts.
Proprietary compound absorbs vibrational energy across 20–200 Hz, reducing structural resonance by up to 95% under CMMs and optical comparators.
Sub-micron stability for precision workstationsDual-chamber air-spring design achieves natural frequency below 2 Hz with automatic leveling within ±0.5 mm. Ideal for mass spectrometers and AFMs.
Low-frequency isolation without active electronicsTuned mass damper cancels specific structural resonance modes in machine frames and optical breadboards. On-site fine-tuning via interchangeable mass inserts.
Targeted chatter elimination for grinding and interferometryCommon questions about vibration isolation for micro-metrology workstations.
Our HD-2000 high-density elastomeric pads are engineered to neutralize structural resonance between 20 Hz and 200 Hz, reducing vibrational energy by up to 95% in that band. This covers the typical high-frequency noise generated by HVAC systems, nearby machinery, and building structure.
If your primary concern is low-frequency floor-borne vibration below 10 Hz — from foot traffic, pumps, or nearby roads — the PTI-500 pneumatic table isolator is the right choice. For higher-frequency resonance within the workstation frame itself, the HD-2000 damping pad is more effective. Many setups combine both for full-spectrum isolation.
Yes. The KAM-100 includes interchangeable mass inserts that let you shift the tuned frequency band on-site. A simple swap of the insert adjusts the mount to cancel a different structural mode without removing the unit from the frame.
The PTI-500 is designed for workstations and instruments weighing between 150 kg and 500 kg per isolator. The integrated leveling valve maintains table height within ±0.5 mm under varying loads, so you can add or remove equipment without re-leveling.
We can produce custom dimensions and thicknesses for the HD-2000 damping pad. Contact us with your workstation footprint and load requirements, and we will provide a quote for a tailored solution.